Wednesday, April 20, 2011

Wizard Walking Stick (completed)

Finally, here are some picture of the completed Wizard Walking Stick I did a while back. After much deliberation, I decided on a finish of Watco Danish Oil (natural) and two coats of  Spar Marine Varnish over that for protection against the elements. I buffed the thoroughly dried project on a lambswool buffing wheel. For the bottom tip, I secured a length of copper pipe fitting with some two-part epoxy. It hasn't seen any hiking action yet, but it will this summer.

at

7 comments:

  1. GillesMay 7, 2011 at 7:01 PM

    I love it.

    ReplyDelete
  2. AveBarnettJuly 22, 2011 at 12:11 AM

    Very impressive, Great job!
    antique walking sticks

    ReplyDelete
  3. UnknownJuly 27, 2011 at 2:53 PM

    Thanks. I'm thining of making a shorter, "cane" version. Maybe in walnut.

    ReplyDelete
  4. GuumasterDecember 26, 2011 at 6:10 AM

    Hi. Very nice job. Which wood is it?

    ReplyDelete
  5. GuumasterDecember 26, 2011 at 6:11 AM

    or which wood would you recommend for this kind of walking sticks? thanks

    ReplyDelete
  6. UnknownDecember 26, 2011 at 6:20 PM

    Gustavo, Hi, I used aspen for this one.

    ReplyDelete
  7. UnknownDecember 3, 2012 at 4:45 AM

    Thanks for giving me information about walking sticks. your blog is very appreciable and quite. Healthgenie .in provides wide range of walking sticks.Thank you

    ReplyDelete